When using the Rapid prototype technology you will often come across terminologies that require a little defining. For instance, the three dimensional printing or 3DP has been developed by the Massachusetts Institute of technology. The method is bonding layers of powders by inkjet in order to form any of the parts.

3D Printer or printing generally refers to the cost economic segments of the rapid prototyping market. The output that is derived using the method is often adequate for the concept modeling or the appearance modeling. Of course it might lack the accuracy of the expensive systems. Yet in the end they may serve the purpose for which they are set up quite convincingly.

The term “absolute accuracy” refers to the difference that exists between the intended final object dimensions and the dimension that is actually derived by the prototype. Two of the denominators are the whole size and the flatness of the object in question.

“Adaptive slicing” refers to use of thicknesses of variable layers in the process of additive fabrications. The normal method is to use thinner layers if you require greater details of the part. Similarly, “additive fabrication” also known as additive manufacturing refers to the fabrication of a part using the addition of materials to substrate or the previously manufactured portions of a part.

One of the methods that are used for achieving the fastest rapid prototyping service is the ADM or Advanced Digital Manufacturing. It is the trade name for the three dimensional system used for direct fabrication.

Of course the list of terminologies is long enough to overshoot the sphere of a short article. However these are few of those that are extremely important for you in implementation of RP methodologies.